Currently Browsing: Atmel AT89C51

How to Blink LED with AT89C51

Interface LED with AT89C51 AT89C51 is a 40 pin microcontroller which belongs to 8051 series of microcontroller. It has four ports each of 8 bits P0, P1, P2 and P3.The AT89C51 has 4K bytes of programmable flash. The port P0 covers the pin 32 to pin 39, the port P1 covers the pin 1 to pin 8, the port P2 covers the pin 21 to pin 28 and the port P3 covers the pin 10 to pin 17. Pin 9 is the reset pin. The reset is active high. Whenever the controller is given supply, the reset pin must be given...

How to Burn a Code on AT89C51 with G540

So, you have a Microcontroller code burner G540 but you don’t know how to use it. In this Article we will teach you how you can burn a simple code with G540. Please Remember the following things: G540 software won’t support 64-bit Edition of Windows. To use G540 with 64-bit Windows, you need to create a Virtual Computer using Oracle VM VirtualBox or similar We recommend using Windows XP or Windows 7 32-bit Lets Get Started: Connect G540 Burner with a computer using appropriate cable (USB/Serial) and install the software. It is recommended to use Windows XP (32-bit) or...

Next Entries »